What Size Are The Screws For A Dell E6330 Lcd Screen

Dell Latitude D620 écran de remplacement

This is a general LCD replacement tutorial made by LaptopScreen.com. Non your specific model? Click hither to search our video library for a model specific guide.

Beneath is a step-by-step guide on replacing an LCD screen on Dell Breadth D620.

ane Disconnect the power from your laptop.

2 The battery is not hands removable on this model, so delight be careful not to turn on the laptop during installation.

3 Continue to removing 6 rubber screws cover.

4 Next, remove 6 screws located under the spiral covers.

5 Now we can remove the bezel. Carefully pry the plastic away from the screen. Start at the elevation and move down to the bottom.

6 Once the bezel is gone, remove 6 frame screws - 3 on each side. Put the screen down on the keyboard.

Don't mix different sets of screws, continue them in separate piles.

vii Remove 4 screws on one side of the LCD panel. In one case the screws are gone remove office of the frame and set up it bated. Repeat the aforementioned procedure with the other side. Please call up which frame office belongs to which side.

8 Disconnect video cable past squeezing tabs of video connector and pulling the video cable out.

9 Disconnect inverter power and prepare the onetime screen aside.

10 Place a cloth or paper tower to protect your new screen from any scratching. Take the new screen out and put in it on top of the material.

Before reconnecting the new screen please proceed in mind that all the connectors are extremely fragile. Practice not put a lot of force or pressure on them.

11 Reattach the video connector minding the tabs.

12 Reconnect the inverter power.

13 Next, line upwards the frame part to the correct side of the LCD panel and secure it with 4 screws. Repeat with the other side.

fourteen Lift the screen upwards and remove the protective film.

15 Replace the 6 frame screws.

16 Now it's safe to examination the new screen. Plug the ability and plough on the laptop. If the start upwards epitome appears - the screen is installed correctly. Plow off the laptop and disconnect the power once more to finish the installation.